Non-Shrink, Non-Staining, Non-Metallic Grout
NS GROUT is designed for critical use where high strength, non-staining characteristics and positive expansion are required. NS GROUT contains only natural aggregate and an expansive cementitious binder. It is extremely flowable. When cured, it appears similar to concrete in appearance.
NS GroutEuco Qwikjoint UVRTammsflex SLTamoseal MEucoflex PU 100Speed PlugEucoflex PU 300 (Exposed)SurflexUltraSil LiEuco Diamond Hard
UV-Resistant Polyurea Floor Joint Filler
EUCO QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKJOINT UVR resists fading from ultraviolet light greater than any existing product. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. EUCO QWIKjoint UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKJOINT UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges. EUCO QWIKjoint UVR is available in 33 standard colors and in a Neutral Base, that can be colored on site with EUCLID UNIVERSAL COLOR PACKS; available in the same 33 colors.
TAMMSFLEX sealants are two-part, elastomeric, polysulfide caulking and sealing compounds.
TAMMSFLEX cures at normal temperatures creating a tough elastomeric seal that adheres tenaciously to masonry, concrete, metal and wood. TAMMSFLEX will withstand repeated expansion and contraction and remain resilient through daily and seasonal cyclic changes in temperature. TAMMSFLEX has excellent chemical, solvent, and water resistance and will withstand joint movement of up to ±25%.
TAMMSFLEX NS is a non-sag gun grade sealant designed for use in vertical and non-traffic bearing horizontal joints subject to expansion resulting from temperature changes. TAMMSFLEX NS is used for all normal construction joints such as panel and curtain wall construction, copings, masonry joints, bridge abutments and building joints. TAMMSFLEX NS is formulated for use in joints subject to long term contact with water and may be used in water reservoirs, dams and foundation joints.
TAMMSFLEX SL is a flowable, self-leveling, traffic grade sealant designed for horizontal joints in patios, plazas, floors, sidewalks, roadways and other areas exposed to pedestrian or vehicular traffic.
Cementitious Waterproofing Slurry and Protective Coating
TAMOSEAL M is a two part and polymer modified cementitious waterproofing slurry to waterproof concrete and masonry. It comprises of a liquid polymer and additives.
Water Based, Liquid Applied PU Elastomeric Waterproofing Membrane
EUCOFLEX PU 100 is a single component high build, thixotropic, emulsified modified with PU pre-polymers and synthetic rubber copolymer of the high performance Neoprene type. The fusion of PU pre-polymer and Neoprene rubber in modified emulsion imparts special properties to the product such as better elongation, recovery and cold flexibility.
Rapid-Setting Hydraulic Cement
SPEED PLUG is a rapid-setting hydraulic cement compound used to instantly stop running water or seepage in masonry or concrete. SPEED PLUG is ready to use and requires only the addition of water before plugging and sealing active leaks. SPEED PLUG is available in a standard 1-3 minute set time formula, as well as a faster setting 45 second version and a slower setting 3-5 minute formulation.
EUCOFLEX PU 300 offered the most advanced waterproofing technology and guaranteed to provide long term performance and security for waterproof environment.
Waterproofing or vapour barrier protection of:
Non-Metallic Floor Hardener
SURFLEX is a quartz-silica mixture of finely graded non-metallic aggregates, plasticizer and cement binder. It is an economical concrete floor hardener recommended for both interior and exterior use. It is particularly valuable because of its non-rusting characteristics when floors will be frequently wet. SURFLEX is available in several colors.
Liquid Densifier, Sealer, and Dustproofer For Concrete
UltraSil Li+ is a water-based lithium silicate solution used to densify, seal and dustproof concrete surfaces. ULTRASIL LI+ penetrates and chemically reacts within the concrete surface, producing extremely hard and dense calcium silicate hydrate (CSH) in the pores. The result is concrete that is more durable, easier to clean, and more resistant to damage from water and mild chemicals. Because the product of the lithium silicate- concrete reaction is formed internally, the protection of ULTRASIL LI+ never peels or flakes off, is unaffected by moisture, and lasts much longer than surface sealers and coatings.
Liquid Densifier and Sealer For Concrete
EUCO DIAMOND HARD is a unique blend of silicate and siliconate polymers that penetrate concrete surfaces and chemically react to provide an increase in surface density, durability, and abrasion resistance. Concrete treated with EUCO DIAMOND HARD is dust-proofed, resists tire marks, and is easier to maintain. Over time, EUCO DIAMOND HARD provides an attractive, slip resistant sheen to concrete that never peels, fades, or wears away.